When using AcoustiSeal, the goal is to create a completely sealed room. Think of the room you are sealing as a water tank.
Make sure the surfaces that are to be sealed are clean.
Cut the nozzle to create an appropriately sized hole.
AcoustiSeal can be applied in three ways:
The first option (A) is to place the sealant under one layer of drywall on both sides.
The second option (B) is the same as the first with the addition of a bead under the plate, resulting in a better seal.
The third option (C) uses a multiple layer drywall installation with beads under each layer and a heavy bead under the plate. This would yield the best seal.
Allow to dry, typically 48 hours, before painting.
Drywall mud can be applied directly over AcoustiSeal.
Clean up with soap and water while still wet.
Keep out of reach of children.
Wear eye protection.
Skin contact: Wash affected area thoroughly with soap and water.
Eye contact: Flush thoroughly with water and obtain medical attention.
Inhalation: Remove to fresh air.
Seek medical attention if swallowed.
Refer to MSDS for further information.