Always shake well before using.
Never aim valve at face.
Hold can upright and apply adhesive in a side-to-side motion 10 to 14 inches from surface.
Temporary Bonds:
Spray one surface.
Allow to tack and apply material to be bonded.
Permanent Bonds:
Liberally spray both surface and material.
Allow to tack, then apply.
When finished with a particular spray application, always turn can upside down and spray for two seconds to clear valve and prevent clogging. If adhesive accumulates around nozzle, wipe clear while wet. If dried in valve opening, remove with degreasing solvent.
Precautions:Contains Acetone and Hexane.
Extremely Flammable. Keep away from heat, sparks, open flame or other ignition sources.
Use with adequate ventilation.
Harmful or fatal if swallowed. Do not take internally. If swallowed, do not induce vomiting. Contact a physician immediately.
Vapor harmful. Avoid inhalation of spray mist or vapors. If overcome, move patient to fresh air. Call a physician immediately.
Eye irratant. Avoid contact with eyes and skin. In case of eye contact, flush immediately with water and continue for 15 minutes. If irritation persists, call a physician immediately.
Contents under pressure. Do not puncture or incinerate container. Do not store at temperatures above 120°F.
KEEP OUT OF REACH OF CHILDREN.
CAS Numbers: Isobutane/Propane Blend.
HMIS Rating: Health = 2; Flammability = 3; Reactivity = 0; Personal Protection = B